Product Details

XM-2437/HY-690

Proven performance for years in automotive industry. Excellent heat resistance and heat cycle resistance.

Product Category by Use by Function
Product Category
  • Resin for Car Electro Devices & Sensors　
by Use
  • Car Electro Devices
  • General Modules
 by Function
  • Flexible
  • Low Stress
  • Heat Resistant
  • Heat Cycle Resistant
Inquire about this product
HY-690
XM-2437

Specification

    Features

  • Two-component heat-curing epoxy resins
  • Amine-based curing agent
  • Flexible
  • Low viscosity
  • Low stress
  • Heat cycle resistance

    by Use

  • Potting for semiconduntor modules
  • Automotive electrical components
  • Sensors, relays

Types of packaging

XM-2437 : 5kg
HY-690 : 2kg

Instructions for Use

  1. The ingredients may separate or the filler may settle. Stir well before use.
  2. Calculate the required main and hardening agents based on the mixing ratios listed in the product information.
  3. Measure the main agent and hardener into a polyethylene cup.
  4. Mix the main agent and hardener well. Use a stirrer or spatula for mixing.
  5. When stirring, make sure to agitate the corners and bottom of the cup.
  6. Defoam the mixed liquid immediately after stirring. Insufficient defoaming may cause air bubbles.
  7. Pour or apply the mixture.
  8. Curing should be done under the specified curing conditions.
  9. Do not cure a large amount at a time. Failure to do so may result in smoking or ignition.
View PDF
Inquire about this product
HY-690
XM-2437

Related Products